WYE Strainer: Bronze - 125 lb - Threaded & Socket Weld

Model: YS 55-BZ

Sizes 1/4" ~ 3"

Threaded Ends

Model: YS 56-BZ

Sizes 1/4" ~ 3"

Solder Ends

WORKING PRESSURES & TEMPERATURE - NON-SHOCK
ANSI 125 Class	YS 55-BZ	YS 56-BZ⁽¹⁾
WOG: Water, Oil, Gas	200 PSI @ 150ﾟF	200 PSI @ 100ﾟF
Saturated Steam	125 PSI @ 353ﾟF	Not Applicable
MAX Liquid	125 PSI @ 400ﾟF	125 PSI @ 400ﾟF

1. The internal working pressure rating for a solder joint strainer is dependent not only on the strainer, but also on the composition of the solder used for the joint. The internal working pressure ratings shown above for model YS 56-BZ are representative of using an alloy Sb5 95-5 tin-antimony solder. For other solder joints, please consult factory.

Features:

```
highly Economical strainer design
```
```
Self Cleaning Type
```
```
Easily Removable Gasketed Screen Caps
```

Straight Threads on Cap Permit Easy Removal when the Screen must be 
Cleaned. Also Helps to Assure Proper Alignment of the Screen When 
Reassembled

precision Machined Screen Seat (Enables Fine Filtrations)

```
Tapped NPT Blow-off
```

Drain/Blow-off Connection Furnished with Plug as Standard

Strainer has Large Open Area - Minimum 2.5 times Larger than Corresponding
Pipe Size. Ensures Low Pressure Loss

High Pressure ANSI class 250 Model YS52-BZ also Available